Castings

Castings for the kits

All parts of my kits, such as castings, are available separately although I will not split brass sprues or sets of whitemetal parts. Some valves/lubricators do not have wheels as these are separate etchings which I cannot supply separately. All are brass unless described otherwise.
As I do not keep a large stock of spares delivery can be protracted if the part you want is out of stock, brass castings for example, take 12 weeks after I place an order. It is advisable to enquire before ordering. Please include £1.50 for postage.

LNER J27 0-6-0 and tender

Mould 1. – £5.50
Comprises: injector, safety valve, sander crank, PV cover, tender cock, front buffer, filler lid, safety chain base, brake standard. (2 reqd)

Mould 2. – £5.50
Comprises: 3 diff. whistles, 2 smokebox darts, NE blower valve, NE recirculating valve, mech lubricator.

Mould 3. – £5.50
Comprises: Pair backhead injectors, clacks, turret, brake valve, blower valve, blowdown cock.

Mould 4. – £5.50
Comprises: LNE chimney, pop s.v. base, round dome, low dome, LNE snifting valve.

Mould 5. – £5.50
Comprises: NER chimney, safety valve cover & valves (no levers), NER dome.

Mould 6. – £5.50
Comprises: 8 buffer bases of 2 types (undrilled), 2 sandbox lids.

Set Whitemetal castings – £8-00
Comprises: 2 x smokebox doors, backhead, piano frontboiler weights, tender toolboxes (early & late), dome, vents, filler, axleboxes.

Chassis kit for LNER B1.

Mould 7. – £5.50
Comprises: 2 each – crossheads, glands, pr. draincocks.

Mould 8. – £5.50
Comprises: Flatter smokebox door, PV front heads, PV rear heads with valve guides, ecc rod brg. cover.

Mould 9.  – £7.00
Comprises: Chimney, dome, later std. smokebox door, dart.

LNER 4200 gallon group standard tender.

Mould 10. – £5.50
Comprises: Rivetted dome, welded dome, filler, water treatment filler.

Set #.  – £6.00
Comprises: 2 types brake handle, scoop handle, 2 water valve handles, cock, vac pipe, steam heat pipe, 2 elbows.

Set #.  – £6.00
Comprises: Separate spring hangers – 7LH, 7RH – long

Set #.  – £6.00
Comprises: Separate spring hangers – 7LH, 7RH – short

Set whitemetal castings – £8.00
Includes: 2 sets springs, axleboxes – for 4200 and 3500 gallon tenders. (these need cast spring hangers above)

Ex-WD Austerity 2-8-0 and tender

Mould 11.  – £5.50
2 reqd. per loco. Comprises: PV heads – front, rear with guide, gland, crosshead nose, cocks, injector.

Mould 12. – £5.50
2 reqd. per tender. Comprises: 5 spring hanger brackets, 3 rocker brackets, brake shaft bearing, water valve handle, front buffer.

Mould 13. – £5.50
1 reqd. per tender. Comprises: Vac. pipe, handbrake, filler, 2 air vents, front buffing pad, water treatment filler.

Mould 14. – £5.50
2 reqd. per loco. Comprises: 3 sandbox fillers – 2 bent, one straight, steampipe, long oil boxes, short oil boxes, bearing, safety valve, trap, water valve handles.

Mould 15. – £7.00
1 reqd. per loco. Comprises: Chimney, dome,
whistle, top feed, snifter-WD, snifter-LNE type, ejector elbow, smokebox dart.

Mould 16. – £5.50
1 reqd. per loco. Comprises: reverser, smokebox saddle, vac. pipe, safety valve base, 2 sandbox fillers.

Mould 17. – £5.50
Cab fittings, 1 reqd. per loco. Comprises: Vacuum ejector, combination brake valve, manifold, Detroit lubricator, blower valve.

Set whitemetal castings – £8.00
Comprises: Backhead and gauges, brake cylinders, smokebox door, AWS battery box, rear sandboxes, pony springs, tender axleboxes with springs.

Chassis kit for BR – 9F

Mould 18. – £6.00
2 reqd. per loco. Comprises: Crosshead, PV rear and valve spindle guide, relief valve, steam passage.

Mould 19. – £6.00
2 reqd. per loco. Comprises: PV front, relief valve, steam passage, lubricator, ecc. rod brg. cover, brake cylinder.

Mould 20. – £6.00
1 reqd. per loco. Comprises: reverser spring casing, dragbox, pony damper, AWS batt. box (NE type), drains-LH & RH.

LNER K1 2-6-0 Locomotive

Mould 21. – £5.50
(2 reqd). 4 spring dampers, PV heads front and rear, sandpipe, crosshead nose, ecc rod brg cover, piston gland.

Mould 22. – £5.50
Drain cocks LH & RH, 4 spring dampers, sandpipe, blowdown valve, front cyl covers LH&RH.

Mould 23. – £5.50
(2 reqd). Wakefield lubricator, 2 oil boxes, 2 sandbox lids & pipes, rear sandbox lid, safety valve, half rear”bumper”, injector, sandpipe, tiny lubricator manifold.

Mould 24. – £5.50
Cab reverser, whistle, front vac pipe, heating pipe, blower elbow, cock on smokebox, sandpipe, AWS reservoir.

Mould 25. – £5.50.
5 electric lamps, generator, speedo brkt, junction box, water gauge, snifter.

Mould 26. – £5.50
Cab fittings – manifold, backhead clacks, blower valve, vac ejector.

Mould 27. – £5.50
5 electric lights, water gauge, steam heat reducing valve, AWS cab box.

Set whitemetal castings – £8.00
Backhead, gauges, cab seats, brake cyls, loco vac reservoir, pr sandboxes, AWS battery box, pony springs, tender springs (need cast spring hangers – above), scoop.

A1

Mould 28. – £6.00 Pr
Rear piston valve heads, front valve head, 2 glands, 2 ecc rod brg covers, AWS battery box.

Mould 29. – £6.00 Pr
Crossheads, pr. draincocks, single front piston valve head.

Q6

Mould 30. – £7.00
Chimney, 2 domes, safety valve base, snifter.

Mould 31. – £5.50
2 reqd. step injector, sandbox crank, 3 oil boxes, 2 gland lubricators, rear oil box, safety valve, 2 sandbox lids.

Mould 32. – £5.50
Sandbox crank, reverser steam valve, NER twin whistles, single whistle, smokebox dart, smokebox wheel and handle, recirculating valve, blower valve, 2 sandbox lids, mechanical lubricator.

Mould 33. – £5.50
Backhead fittings: blower, brake, turret, NER injectors, later clacks.

Whitemetal castings – Q6 & tender – £8.00
2 smokebox doors, sandboxes LH & RH, backhead, 2 slidebar brkts, 6 each tender axleboxes & springs of 3 types, 2 tool boxes. Note springs need moulds 35 or 36 to complete.

NER Tender

Mould 34. – £5.50
Cock, Upper water valves, 2 types handbrake bracket, 2 safety chain bases, filler lid.

Mould 35. – £5.50
12 short spring hangers.

Mould 36. – £5.50
12 long spring hangers.

Mould 37. – £5.50
Additional parts: 2 types scoop bracket, later dome, vac. pipe, heating pipe.

Mould 38. – £5.50
NER parts for Q6 kit: 4 buffer bases, 2 vents, scoop handle bracket.

Whitemetal castings – NER tenders – £8.00
3 types tender axleboxes & springs (need brass hangers), vents, scoop, dome, brake cylinders (incl. vac), 2 types toolboxes, Westinghouse reservoir, top vac. reservoir. Note springs need moulds 35 or 36 to complete.